Mayhem Sale Ends:0 Days8 Hours55 Minutes23 Seconds

Site Planning

Spare Parts | Warranty | Product Registration
Read and follow all instructions in your Assembly Manual before using your Vuly, and do not use it in any way that is not described in the manual. Responsibility rests with the owner and supervisors of the product to make sure that all users are aware of the practices specified in the manual. Keep your Assembly Manual for future reference.

Choosing The Right Location - Trampoline

Read and follow all instructions in your Assembly Manual before using your Vuly, and do not use it in any way that is not described in the manual. Responsibility rests with the owner and supervisors of the product to make sure that all users are aware of the practices specified in the manual. Keep your Assembly Manual for future reference.

For care and maintenance, use and behaviour and assembly instructions, find your relevant Vuly Assembly Manual here.

Choosing the right location - Swing Set / Monkey Bars

Place the swing set or monkey bar on a flat, level surface with impact attenuating properties - such as grass or rubber*. Ensure that it is sufficiently stable to prevent it from tipping over or blowing away. Always secure the swing set to the ground with the included Anchor Kit.

*If you have no impact-attenuating surfaces, and you assemble a swing set on concrete, you must secure it to with the Bolt Kit accessory (sold separately).

Keep a minimum of 2m clearance overhead and on all sides. This area should not include fences, walls, overhanging wires or branches, laundry lines or other hard surfaces, as these can cause serious injuries.
Safety Checks